TYPE HBD – BASE DRUM HEATER

    Robust Steel Construction
    Even Heat over Platen Area
    High Temperature Tolerance
    110 or 230 Volt Options
    20° C to 150° C Thermostat
    2 Metre Braided Power Cable

The HBD base drum heaters are manufactured with a 900W silicone rubber insulated heater mat which provides an even distribution of heat to the platen. If rapid heat up is required and the contents will accept heat rapidly, or solid medium are involved a HISD side drum heater can be used in conjunction with the HBD; alternatively a thermally insulated jacket can be used.


The HBD is made from 2mm thick mild steel for extra rigidity on uneven surfaces with tapered edges for safe ease of drum location and is protected by a resilient high temperature coating. Temperature adjustment is afforded by a front aperture in the control unit, with neon’s indicating power on and load switching, all viewed through a window in the control unit top. The base drum heater is controlled by a 20° to 150°C capillary thermostat.

Specification:

Power Rating: 900 Watts 230 Volts AC 4 Amps or 110 Volts AC 8.5 Amps
Heater Element: Wire Element, Glass impregnated silicone heater mat
Insulation: 50mm High-density rock wool
Supply Lead: 2 Metres flexible armoured SY type 3-core cable
Weight: Approximately 15 Kg

Dimensions:
Platen: Height 70mm, Diameter top 550mm, Base 600mm
Control Unit: Height 105mm, Protrusion 280mm
Overall Unit: 880mm long, 600mm wide, 105mm high

Health & Safety:

HBD base drum heaters are manufactured to conform to the EEC low voltage and EMC directives and CE marked accordingly.

Care should always be taken, to ensure the drum is adequately ventilated before applying heat.
 


Key:

  1. Drum heater base
  2. Heater mat
  3. Thermal Insulation
  4. Thermostat & control housing
  5. Control knob
  6. Control knob access
  7. Viewing window
  8. Armoured power cable