HISD Side Drum
A simple and effective heating solution for all types of drums; particularly plastic containers.
Advantages of the HISD
These jackets are ideally suited for the warming of a variety of products including fats, oils and foodstuffs. Used throughout the world by a multitude of industries from pharmaceutical to chemical, cosmetic to food, the HISD heater is the ideal solution for heating liquid materials stored in metal or plastic drums.
Construction
The HISD is manufactured from lightweight but resilient materials and fitted with adjustable quick release buckles for ease of installation and removal. Temperature is regulated via an in-built thermostat up to a maximum of 90c for plastic drums. Jackets with higher power ratings and 0-120°C thermostat can be manufactured for use with metal drums.
Technical Data
| Power rating: | 110 or 230 Volts, Power as below |
| Temperature Control: | 0 to 40c or 0 to 90°C |
| Size: | Wattage: | Drum Size: |
| 400mm x 1020mm | 200 Watts | 25L |
| 460mm x 1250mm | 250 Watts | 50L |
| 370mm x 1650mm | 400 Watts | 105L |
| 450mm x 1950mm | 450 Watts | 200L |
| 800mm x 1950mm | 1200 Watts | 200L |
Thermal Insulation Jacket
Manufactured from the same materials as the drum heaters, Holroyd can supply insulation jackets to cover all sizes of drums and containers to help reduce heat losses of pre heated products.
Custom Made
A wide range of sizes can be manufactured to customer’s requirements. Higher power ratings are also available for metal drums. Please contact our technical sales team for advice and information.
Health and Safety
All HISD side drum heaters are manufactured to conform to the EEC low voltage and EMC directives and CE marked accordingly. It is advised that power to the drum heater be disconnected when the drum is either empty or being filled and upon installation or removal of the heater itself. It is recommended that the unit be operated in a dry environment with the drum vented to avoid build up for pressure.
Customer Support
Established in 1972 Holroyd have been providing surface heating solutions to customer requirements throughout the world. As Europe’s largest specialised silicone rubber heater manufacturer our experience and product range is vast.
For detailed product information please contact our technical sales team.
Product finder
- WIRE WOUND HEATERS
- ETCH FOIL HEATERS
- KAPTON INSULATED HEATERS
- DRUM HEATERS
- HSSD SIDE DRUM
- HISD SIDE DRUM
- HIBC-B CONTAINER
- HBD BASE DRUM
- HTSD HIGH TEMPERATURE
- HIJD INSULATION
- HIBC/A BAG IN A BOX
- PREFORMED HEATERS
- SILICONE HEATER ACCESSORIES
- SILICONE HEATER FIXINGS
- THERMOSTATS & ELECTRONIC CONTROLLERS
- THERMAL DEVICES
- POLYESTER HEATERS
- CARTRIDGE HEATERS
- MICA HEATERS
- TYRE WARMERS
- Ex-Stock
- Teflon/Polyester Jacket
- 0-40°C or 0-90°C Thermostat
- Thermal Insulation Adjustable
- Quick Release Buckles
- Standard sizes 25L, 50L, 105L
- and 200L
- Bespoke Sizes to Order
- 4 Metre Power Cable Double
- Insulation IP40
Downloads for this product:
Datasheet (PDF)
Brochure (PDF)

